Multi Layer Sintered Filter Elements , Stainless Steel Wire Mesh Sintered Medias

Sintered Medias Formed By Stainless Steel Wire Mesh - Sintered Filter Elements

Multi-layer sintered metal mesh filter elements are new type of filter material which is made of multi-layer metal braided wire mesh, which is made by special laminated pressing and vacuum sintering process, and has high mechanical strength and integral rigid structure. It has excellent filtration precision, filtration resistance, mechanical strength, abrasion resistance, heat resistance and work ability. The comprehensive performance is obviously better than other types of filter materials such as sintered metal powder, ceramic, fiber, filter cloth and filter paper.(5 10 20 30 40 50 75 100 micron Multi-Layer metal sintered mesh )

Sintered Filter Elements- baskets, strainers and cylinders make up one of the most widely used range of filters used to separate solids from liquids.With a well-established design, each filter comprises an assembly of a perforated metal cylinder or cone that supports one or more layers of very fine wire mesh.

To increase their structural strength, the sintered filter elements can also be manufactured with two perforated cylinders with one or more layers of fine wire mesh sandwiched between them, reducing the open area and so enabling the filtration of very fine impurities.

The sintered filter elements are inserted in a hollow body (known as a filter housing) in the path of the fluid flow, parallel to the flow, forcing the fluid to pass through the filter media. The size of the wire mesh required depends upon both the type of fluid to be filtered and the size of the impurities.

Materials: SS304, SS316, stainless steel is woven wire mesh,
Filter rating: 0.1 microns to 100 microns
Inner diameter: 28mm, 40mm
Outer diameter: 64mm, 70mm
Length: 10", 20", 30", 40"
Operating temperature: -200 to 600°C